Зидна плоча за звучну изолацију

1. Substrate wall body: The layered structure of the metal carved board ensures that the insulation decorative panel itself is firm and flat. Therefore, the bottom layer should be coated with standardized cement mortar, without cracking, powder shedding, sand production, wall hollowing, peeling, surface leveling, vertical building facades, vertical external corner lines, and fine convexity and surface roughness of the basic wall can be adjusted using specialized mortar.

2. Sticking: To achieve the required bonding compressive strength, it is necessary to immediately stick it to the wall like a special mortar for lightweight boards.

3. Sounding: Use sounding components to tightly tie the decorative panel layer, and then tightly connect the furniture panels and walls. In multi-story buildings in urban squares, the use of this duplex building as a fixed and immovable method provides more safety precautions.

4. Joint solution: A joint with a width of 5mm to 10mm must be ensured in the middle of the furniture board. After the cement mortar at the bottom of the finished board is dried, foam plastic should be embedded in the joint and all joints should be covered with weather resistant sealing silicone material.

1.Customers often ask, which buildings are your products suitable for? Generally speaking, Shanghe metal sidings are suitable for decoration of exterior wall of various buildings, as well as certain interior decoration, tooling, partition, etc.Our sidings have been widly adopted both in China and at abroad, such as USA, South Korea, South Africa,the Middle East, Russia,Malaysia,Thailand,ect. Such metal sidings can be used on such constructions as hospitals, schools, residences, hotels,office buildings, tourist holiday houses, government agencies, etc, and also can be usded to built many temporary houses such as integrated houses, sentry boxes, mobile toilets, and municipal houses.
2.There are more than 100 of patterns of shanghe metal sidings. The fantastic decoration effect highlights the grade of buildings. The simple and flexible disassembly and assembly of these metal sidings make the replacement of the design of walls easy.Metal sidings are not only suitable for the thermal insulation decoration of the exterior walls of new brick-concrete structures, frame structures, steel structures, and light-weight houses, but also for the energy-saving renovation of existing buildings, as well as interior and exterior decoration.
3.Metal carved panels can be widely used in the construction of public facilities, apartments, residential buildings, scenic spots, etc. Renovation of watchtowers, guard posts, renovation of old buildings, building mix-and-match structures, frame structure to steel structure, not only suitable for brick structure of buildings, suitable for light-weight buildings in the field of construction engineering, but also suitable for decoration and energy-saving renovation of other existing buildings, and exterior decoration. Exterior wall decoration and indoor integrated board are being built to become the best choice for more and more wall decoration.